Developments and Exclusive Products
Nova Swiss Exclusive
Nova Swiss Exclusive stands for quality you can trust. Our proven quality starts with a high degree of diligence and established expertise in material selection, followed by a sophisticated processing chain that culminates in comprehensive customer support. Nova Swiss Exclusive products ensure the long-term and smooth operation of your systems. Through intensive research and continuous development with strict quality controls, we ensure that our components always embody the technological state of the art.
We have been a leading global supplier of products for ultra-pure gas and hydrogen applications for over 25 years.
Development and Consulting
We create the basis for sophisticated, new and optimized products in the areas of "High-Pressure Technology" and "Engine Components" by continually expanding our expertise. In addition to complex calculations, our ongoing tasks include the assessment of suitable materials and manufacturing processes.
In our state-of-the-art materials lab, we carry out results-oriented material analysis for our "High-Pressure Technology" and "Engine Components" product lines. For our "Surface Technology" product line, we check the quality of coatings via elaborate analysis and test procedures.
We constantly ensure that all Nova Swiss products meet the latest requirements of the market as well as all statutory regulations.
Our duties:
- Support for the"High-Pressure Technology" and "Engine Components" areas
- Analysis and testing of materials and coatings
- New product development
- Optimizations
The Lab
The company's proprietary state-of-the-art materials lab supports our research and development activities.
Gas Filling Systems
Nova Swiss has developed gas filling systems to fill high-pressure bottles and containers. They are distinguished by their optimal adaptation to virtually all operating conditions (liquid, pressure, flow rate, etc.) and also meet all specific functional requirements. These systems are based on Nova Swiss standard components.
Applications
Security and defense industry as well as all high-pressure applications.
Technical options
- Fluid: pure gases (1), including O2 and H2 applications
- Pressure: up to 3000 bar
- Gas temperature from -32ºC to +60ºC
- Nova Swiss diaphragm compressor up to 3000 bar
- 1 or 2-stage compressors
- Parallel mounting possible to increase the flow rate
Connections
- HP Standard Nova Swiss connections
- Semi-rapid connection for max. 1000 bar
- Rapid connection for max. 400 bar
- Manual control, optionally with automatic regulator
- PED 2014/68/EU Agreement and Labeling (up to Category IV)
High-Pressure Cylinders
The Nova Swiss High-Pressure Cylinder I is designed for liquids and gases up to 145,000 psi (10,000 bar).
It is available in seven standard models (three volumes and three pressure ranges) with a choice of different connections. Further optimizations to meet custom requirements are possible.
Specifications
- Two connections (inlet/outlet)
- 15 μm input filter
- Two check valves mounted in the outlet
- Material: stainless steel (high mechanical and chemical resistance)
- Packing: Elastomer O-ring
- PED 2014/68/EU Agreement and Labeling (up to Category IV)
Applications
- Pvt. laboratories (petrochemical, biomaterials, biology, etc.)
- High-pressure gas or liquid containers
The Nova Swiss High-Pressure Cylinder II is designed for high-pressure gas applications up to 20,000 psi (1,350 bar).
It is available in six standard models (three volumes and two pressure ranges) with a choice of different connections. Further optimizations to meet custom requirements are possible.
Specifications
- Opening for connector at the top (screw cap)
- Two connections (inlet/outlet)
- 15 μm input filter
- Two check valves mounted in the outlet
- Material: stainless steel (good mechanical properties)
- Packing: Elastomer O-ring
- PED 97/23/EC Agreement and Labeling (up to Category IV)
Applications
- Military industry (exhaust systems), gas tanks, etc.
High-Pressure Container
The Nova Swiss High-Pressure Vessel I is designed for liquid and gaseous media for high-pressure applications up to 8,000 psi (550 bar) and temperatures up to +550°C. The modular design allows configuration in six standard versions (three volumes and two pressure ranges) with a choice of different connections and can be optionally adapted to meet individual requirements.
Specifications
- Five connections (inlet/outlet, thermocouple, sampling tube)
- Material: stainless steel (high mechanical and chemical resistance)
- Seal: elastomer or metallic O-ring (depending on application)
- PED 2014/68/EU Agreement and Labeling (up to Category IV)
Applications
- Pvt. laboratories (petrochemical, biomaterials, biology, etc.)
The Nova Swiss High-Pressure Vessel II is especially suitable for liquids and gases in high-pressure applications up to 60,000 psi (4,000 bar). It is available in seven standard models (three volumes and three pressure ranges) with a choice of different connectors and can also be optimized for various technical requirements.
Specifications
- Screw-cap connection with non-rotating sealing
- Two connections (top and bottom)
- Material: stainless steel (high mechanical and chemical resistance)
- Seal: elastomer or metallic O-ring (depending on application)
- PED 2014/68/EU Agreement and Labeling (up to Category IV)
Applications
- Isostatic presses, chemicals, petrochemicals, etc.
Isostatic Presses
General Description
Isostatic presses are specifically developed and manufactured by Nova Swiss Sarl in accordance to customer requirements. Cold, warm and hot presses are available for use at up to 10,000 bar and at temperatures from -20 to 2,200°C.
Applications
- Sintering of powders for the production of complex geometries with high resilience. (Plastic, ceramic, graphite, metal, etc.)
- Sterilization of food
- Pressure / temperature simulations
- Hardening of mechanical parts
- Elimination of natural porosities in raw metallic materials
- Pressing of sintered parts (carbides, steels, etc.)
Custom Systems
Nova Swiss Sarl develops and produces customer-specific systems for various applications.
Possible Applications
- Corrosion testing
- Crystalline hydrothermal synthesis (quartz, etc.)
- Supercritical CO2 capture and extraction
- Test equipment for high-pressure components
